Views: 311 Author: Site Editor Publish Time: 2021-11-11 Origin: Site
An automatic blade bending machine is suitable for various iron sheets in construction projects. In addition to completing the original work performance, the automatic blade bending machine can also automatically bend raw materials with the assistance of manual loading and unloading. For workers, the work procedure is simple. At the same time, the automatic blade bending machine can complete various required shapes with corresponding column sleeves.
What are the precautions for workers to use the automatic blade bending machine?
How to maintain the automatic blade bending machine?
Why do we choose automatic blade bending machine?
When adjusting the gap between the upper and lower molds of the automatic blade bending machine, the slider must stop at the top dead center. The gap must be adjusted from large to small. Initially adjust the gap between the upper and lower molds. Generally, it can be about 1 mm larger than the plate thickness. The gap must be greater than the plate thickness to avoid crushing the mold due to no gap. When two or more people bend, one person must be designated to step on the brake, and the power must be cut off when separating the machine tool.
1. Steel plates are supplied with a limited length, usually without overlap, and the length of the steel plate is sufficient to meet the needs of roofing. Selection of self-tapping screws for steel rule automatic bending machine. When selecting the fixing screws, the fixing parts should be selected according to the service life of the structure, and special attention should be paid to whether the life of the covering material is consistent with the specified fixing part life.
2. Clamp the overlapped steel plates with a pair of clamping pliers. When the steel plate is in position along the longitudinal direction, its end, especially the upper end, needs to be clamped with pliers to ensure that one end of the steel plate is in place. The steel ruler automatic bending machine also makes the overlap of one end in the correct position. Thus, the steel plate is fixed. During the fixing process, the clamp should always clamp the steel plate in the longitudinal direction.
3. After using the new steel ruler automatic bending machine for one month, check whether the bending of each tubing is deformed. If there is any abnormality, it should be replaced. After two months of use, the joints of all accessories should be tightened. When doing this work It should be shut down and the system has no pressure.
1. The automatic blade bending machine does not need to add any auxiliary gas for cutting, and the cost of consumption is very low. The external power supply is 220V.
2. The automatic blade bending machine has a wide range of applications, which can cut 1mm-22mm wood, plastic, plexiglass, and acrylic boards, and the cutting speed is 25-30m/h. In addition, the machine can cut gaps of 0.45mm, 0.71mm, 1.07mm and 1.42mm, with uniform cutting width and upper and lower seams.
Most products in life are inseparable from automatic blade bending machine, so automatic blade bending machine plays an irreplaceable role in life. Shenzhen Test Laser Equipment Co., Ltd. has been focused on automatic blade bending machines for several years. They will make every effort to meet the needs of users.
