What is steel rule die-making equipment?

The steel rule die-making equipment is a simple and effective die-cutting equipment for cutting, perforating, or scoring various materials. The steel rule die-making equipment is made by cutting a thin groove into a flat, rigid base, such as a wood laminate that reflects the shape of the final product.

• What is the working principle of steel rule die-making equipment?

• What do you know about steel rule die-making equipment?

• What should I do if the knife of the rubber sheet laser die is easy to rust? Is there any way to prevent rust?

What is the working principle of steel rule die-making equipment?

Push the thin steel strip into the groove so that the height above the base depends on the desired thickness of the final steel rule die-making equipment. If you need a clean-cut, the edge of the protruding steel strip can be sharpened along the entire edge. If you need a perforated cut, you can sharpen steel rule die-making equipment intermittently. If you only score the material, you can round corners on various profiles. Then put the entire mold into a press with cut-out material, and press it on the press to complete the die-cutting cycle.

What do you know about steel rule die-making equipment?

The steel rule die-making equipment consists of thin plastic or stainless steel tube forming a decorative shape. When the steel rule die-making equipment is pressed into a piece of dough, this shape is cut from the dough. The working principle of the steel rule die-making equipment is the same as that of cutting shapes from various materials including rubber, vinyl, and paper. To make a steel rule die-making equipment, a flat sheet made of a strong substrate, such as laminated wood or aluminum, is cut with a thin groove in the shape of the finished product. The groove width is generally between 0.028 to 0.056 inches (0.7 to 1.4 mm) and is usually cut with a laser cutting machine. Then put a thin, highly flexible steel strip into the groove along the entire length, or a ruler, high enough to sit at the bottom of the groove, and a certain amount of the main body does not touch the surface of the substrate, forming The "tubular body" of the biscuit cutter.

What should I do if the knife of the rubber sheet laser die is easy to rust? Is there any way to prevent rust?

Rubber sheet laser die refers to a laser knife mold used for die-cutting of self-adhesive labels, electronic films, and other products. It is generally made of 5MM and 6MM PVC rubber sheets. After cutting the knife with a low-power laser knife mold machine, install the knife. Generally install 0.45mm thick, 8mm, 9mm high blades.

However, the chemicals produced by the laser cutting of the PVC rubber sheet will cause the blade to rust soon after the die is made.

Friends of the rubber sheet laser die factory often suffer from this problem. Is there a way to solve this problem?

After a long-term research, we have found a solution to the problem after experiments:

After the PVC rubber sheet is cut with a laser, there is no need to install a knife. Use an air gun to blow clean the chemicals in the slit of the knife, and then soak the rubber sheet in an anti-rust product called Teflon potion. Take it after 7 or 8 minutes. Come out to dry and install the blade to ensure that the blade will not rust after long-term use.

The steel rule die-making equipment has become one of the machines widely used in the production process of the factory. The quality of the steel rule die-making equipment will also greatly affect its production efficiency. Shenzhen Test Laser Equipment Co., Ltd. is a laser cutter mold equipment manufacturer established for more than ten years. Choosing them means that you have chosen a high-quality die-cutting machine.