Views: 310 Author: Site Editor Publish Time: 2021-11-10 Origin: Site
The auto blade bending machine is suitable for the bending of various steel rules in construction projects. In addition to completing the original work performance, the auto blade bending machine can also be automatically bent with the aid of manual loading and unloading. The shape can be completed with corresponding column sleeves.
What is the workflow of the auto blade bending machine?
What is the wear standard of the knife row of the auto blade bending machine?
What should we pay attention to when using the blade automatic bending machine?
The auto blade bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a workbench, and a clamping plate. The workbench of the auto blade bending machine is placed on the bracket. The workbench is composed of a base and a pressure plate. The tight plates are connected, and the base is composed of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the wire is energized to the coil, and the gravitational force is generated on the pressing plate after being energized, to realize the clamping of the thin plate between the pressing plate and the base. Due to the electromagnetic clamping, the pressing plate can be made into a variety of workpiece requirements, and the workpiece with the sidewall can be processed, and the operation of auto blade bending machine is also very simple.
1. Auto blade bending machine depends on whether the cutting edge of the blade is worn or not, and the retreat and unevenness of the unevenness.
2. The product after the blade is cut: neat, smooth, free of burrs, and the product is up to the standard.
The key to this problem lies with the user. If the product department you produce is qualified, it means that your auto blade bending machine will not work.
1. Start the automatic blade bending machine for several cycles to ensure that under normal conditions, test cuts of different thicknesses, from thin to thick. Ensure that the user is familiar with the performance of the shears.
2. Different blade gaps must be adjusted for different plate thicknesses during trial cutting. If the corresponding blade gap is not adjusted, the durability of the blade will be affected.
3. The automatic blade bending machine turns on the pressure gauge switch during the cutting process and observes the pressure value of the oil circuit. The pressure should be less than 20MPa when cutting a 12mm board. This remote pressure regulating valve No9, the pressure is set to 20-22MPa at the factory, the user must abide by this regulation, and shall not increase the pressure for cutting over the specified material surface and cause damage to the machine.
4. Sound balance during operation. If there is noise in the automatic blade bending machine, stop and check.
5. When the blade automatic bending machine is operating, the maximum temperature of the fuel tank is less than 60 degrees, if it exceeds 60 degrees, it should be shut down and rested.
As an important part of modern industrial production, the role of the auto blade bending machine cannot be ignored. Shenzhen Test Laser Equipment Co., Ltd. is also a professional factory to produce die board laser cutting machines.
