Views: 319 Author: Site Editor Publish Time: 2021-11-09 Origin: Site
An auto knife bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a working table, and a clamping plate. The working table is placed on the bracket. The working table is composed of a base and a pressing plate. The base is connected with a hinge and a clamping plate. Connected, the base is composed of a seat shell, a coil, and a cover plate, the coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate.
How to use the auto knife bending machine?
Why do we choose an auto knife bending machine?
What is the wear standard of auto knife bending machine tool row?
1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start, so you can hear the sound of the oil pump rotating. (The auto knife bending machine does not operate at this time.)
2. Stroke adjustment, the auto knife bending machine must pay attention to adjusting the stroke, and be sure to test before bending. When the upper die of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise, it will cause damage to the mold and the auto knife bending machine. The stroke adjustment also has electric quick adjustment and manual stomach adjustment.
3. Slot selection for the auto knife bending machine. Generally, a notch of 8 times the width of the plate thickness should be selected. If you bend a 4mm sheet, you need to choose a slot of about 32.
4. Backgauge adjustment generally has electric quick adjustment and manual fine adjustment, the method is the same as the shearing machine.
5. Step on the footswitch to start bending. The auto knife bending machine is different from the shearing machine. It can be released at any time. When you release the foot, the bending machine will stop and continue to go down when you step on it.
1. The auto knife bending machine can process the minimum processing radius of 0.5mm and other 1.0mm.
2. The auto knife bending machine can automatically identify the cutting direction. It can cut the knife at any short position you want, but others do not have these functions. The shortest knife is 2.5mm.
3. The auto knife bending machine can automatically adjust the height of the bridge.
4. The auto knife bending machine has no motor control, cutting and bridging noise, no helplessness or knife block.
5. The auto knife bending machine can continuously make bridge holes and work continuously without round-trip bridge making.
6. The auto knife bending machine has integrated work (select all knives to be bent, and then the machine will continuously bend all knives, the same as the cutting line).
7. The auto knife bending machine has an automatic alarm and self-protection functions. In case of misoperation and machine failure, the machine will stop and display the error code, which you can easily check.
1. The wear standard of the auto knife bending machine tool row depends on whether the blade edge is worn, as well as the shrinkage and unevenness of unevenness.
2. Products after blade cutting: neat, smooth, burr-free, and up to standard.
The key to this problem lies in the user's standards.
If your product department is qualified, it means that the wear standard of the blade row of your auto knife bending machine is acceptable.
After reading this article, do you know more about auto knife bending machines? I believe you need to order an auto knife bending machine very much. Shenzhen Test Laser Equipment Co., Ltd. has committed to fulfilling all the requirements of the blade bending machine.
