Views: 330 Author: Site Editor Publish Time: 2021-11-30 Origin: Site
The laser die board cutting machine cuts the wooden board into various desired shapes, and then inserts a blade in the cutting seam of the laser, which is called a "knife mold", and then uses this template to cut the cut paper (it may also be Other materials), and then use the laser die board cutting machine to press the marks, fold it, and paste it again to get the product.
What should be paid attention to when choosing a laser die board cutting machine?
When using the laser die cutting machine, what accessories should be paid attention to?
How to maintain the laser die board cutting machine during use?
1. After bonding various materials, choose the high-end knife and short-peak knife, wood mold, and rubber sheet film based on the thickness, hardness, and complexity of the product. The blade height is relatively high and easy to adjust. Generally 2MM~6MM.
Corrosion mode is generally 1MM~1.5MM;
The engraving laser die board cutting machine is generally 1MM~2MM;
The hardware laser die board cutting machine is punched with a punch.
2. When choosing a laser die board cutting machine, pay attention to the horizontal or straight-line treatment of the knife peak
The horizontal-grained knife has a better effect on die-cutting paper, is more durable, has no chaos and higher accuracy, and is not easy to crack after being bent. The straight-grained knife surface seems to be very sharp, so it is cut on the steel plate when die-cutting. On the surface, it is easy to blunt the mouth after a short period, and at the same time, laser die board cutting machine is also easy to crack after bending. Therefore, in addition to die-cutting film products, the use of straight-grain knives is smoother, and the best choice for die-cut paper products is horizontal grain processing. Die-cutting knife.
1. Whether the bottom of the plate, the knife, and the line of the plate are flat, and the line of the knife is not flat, which affects the service life of the laser die board cutting machine.
2. Whether the knife line is too long, the knife is too long, causing the laser die board cutting machine to break easily, the product size is poor, and the crimping line is too long, which affects the product forming and the line burst.
3. Whether the position of the connecting blade is correct, and the incorrect position of the interface will cause: (1) The product is not beautiful when cut out; (2) The interface is easy to crack during die-cutting.
4. The blade that exposes the layout is shorter than 5mm, and a half-piercing bridge should be used, otherwise, the blade is easy to bend and deform.
1. Check whether the water in the laser die board cutting machine is sufficient before cutting. In this way, the service life of the laser can be guaranteed.
2. The operator should not leave the laser die board cutting machine during the cutting process to prevent accidental fire.
3. Not the operator, remember not to run the machine in a mess. Non-operators should not start the machine. Lasers can also hurt people, so use them with care.
4. After using the laser die board cutting machinee, check whether the laser lens is dirty to ensure the cleanliness of the lens.
5. In use, oil should be frequently applied to the track of the laser die board cutting machinee, and the machine should be maintained. This will reduce the friction of the machine parts.
6. Any abnormal situation should be reported to the manufacturer in time.
7. It is best to check whether the computer is poisoned in the process of transferring files, to ensure the normal use of the machine's software.
With the development of science and technology, the demand for laser die board cutting machines is also increasing. The correct use of laser cutting opportunities greatly improves work efficiency. Shenzhen Test Laser Equipment Co., Ltd. commits to provide the perfect laser die board cutting machine for every customer from all countries.
