How to use steel rule die-making equipment?

The steel rule die-making equipment is a piece of professional process equipment (tooling) for the metal and non-metal pressure forming and process system. It is a special forming tool and a special technical product. The realization of industrialization and commercial production of steel rule die-making equipment is a sign of the progress and level of manufacturing technology and the technological basis of manufacturing modernization.

How much do you know about steel rule die-making equipment?

Steel rule die-making equipment has been used in industry to obtain various molds and tools required by injection molding, blow molding, extrusion, die-casting or forging molding, smelting, and stamping. This steel rule die-making equipment is composed of various parts, and different molds are composed of different parts. constitute. It mainly realizes the shape of the article through the change of the physical state of the molded material. Steel rule die-making equipment are classified according to the technology used. Commonly used are: stamping dies, including punching, dies, bending dies, drawing dies, turning dies, shrinking dies, undulating dies, bulging dies, shaping dies, etc.

What should I pay attention to when selecting materials when using a steel rule die-making equipment?

1. Polishing the connection port:

(1) Do not grind the blade too thin, the interface is easy to crack, and it must be even.

(2) The edge of the steel rule die-making equipment should not be blackened, which will cause annealing and the edge of the knife can easily collapse and break.

2. At narrow corners, the turning angle is less than 0.5R and less than 30. It will cause the knife edge to crack at the corner. At this time, choose a knife material, choose a soft knife, and import a broaching knife.

3. The rounded angle is less than 1.5R and the angle is greater than 90°. Choose a knife material instead of a hard polished knife, otherwise, it will cause the scimitar to crack corners.

How to prevent the steel rule die-making equipment from freezing during use?

1. Don't turn off the chiller

The workshop ensures that the chiller will not be turned off under the condition of power failure, and the chiller will work for 24 hours, so that the cooling water is always circulating, so that the cooling water will not freeze and damage the steel rule die-making equipment.

2. Drain the cooling water after shutting down

After the steel rule die-making equipment is used, drain and clean the cooling water in the laser tube and the chiller in time.

3. Add antifreeze

Antifreeze can be added to the cooling water. The antifreeze can be selected from major brands of automobile engine antifreeze. According to the local temperature, refer to the instructions and dilute steel rule die-making equipment with pure water for use. Antifreeze cannot be used instead of pure water for a long time throughout the year. Replace in time.

Adding antifreeze to the cooling water will affect the laser power to a certain extent.

Steel rule die-making equipment manufacturing is the foundation of manufacturing. In electronics, automobiles, motors, electrical appliances, instruments, meters, home appliances, and communication products, 60% to 80% of the parts must be formed by molds. Shenzhen Test Laser Equipment Co., Ltd. has worked for many years to meet every customers’ need from the steel rule die making industry, craft manufacturing industry, product packaging industry, and so on. You can rest assured to choose his products.