How to use a laser dies cutting machine?

Laser cutting processing is to replace the traditional mechanical knife with an invisible beam. It has the characteristics of high precision, fast cutting, not limited to cutting pattern restrictions, automatic typesetting, saving materials, smooth cuts, and low processing costs. Therefore, the laser dies cutting machine will gradually improve or replace the traditional metal cutting process equipment.

• What are the main possible reasons for the uneven size of the slit in the laser dies cutting machine?

• What is the solution for the uneven size of the slit in the laser dies cutting machine?

• What are the problems that often occur when using the laser dies cutting machine, and how to deal with them?

What are the main possible reasons for the uneven size of the slit in the laser dies cutting machine?

1. There is no parallel guide rail for light guide of laser dies cutting machine;

2. The vertical light is not vertical to the surface of the material;

3. The work surface is not level (not parallel to the XY plane);

4. Material deformation;

5. The laser light is unstable (maybe a hardware problem of the laser tube or laser power supply);

6. The cutting parameters of laser dies cutting machine do not match.

What is the solution for the uneven size of the slit in the laser dies cutting machine?

The solution is as follows:

1. Repeat the XY optical path detection carefully to make sure it is not that the light is not parallel to the XY rail in laser dies cutting machine;

2. Cutting the seam with a vertical ruler is more vertical, and the result also excludes this cause;

3. Use small pieces of material for cutting, and as a result, uneven knife seams also occur;

4. Exclude at the same time as 3;

5. The power supply voltage is measured, the voltage is normal, and the faults such as the replacement of the laser still exist;

6. Simultaneously with the above five points.

What are the problems that often occur when using the laser dies cutting machine, and how to deal with them?

1. Whether the specifications of the knife, thread, and tooth knife correspond to each other. Inconsistent specifications of tooth laser dies cutting machine will cause:

(1) The tooth density causes the product to break easily;

(2) It is not easy to break due to sparse teeth;

(3) The height of the toothed knife is not consistent, which will cause the product to be worn or the effect of the beer is not obvious. The height of the knife will cause the product to cut or fail to cut, and the height of the thread will cause the thread to burst or the indentation is too shallow. Affect product molding.

2. Whether the rounded corners of the plug tongue of the box are smooth, whether the R angle is appropriate, if the R angle is too large, the plug tongue will not be inserted, and if the R angle is too small, the product will pop up. The three ears of the box will be 90 °.Whether it is just right, the three angles are too dead or open, which will cause the product to pop up or not to be inserted.

3. When cutting different knives and threads, you should choose different die laser cutter. When using it, you need to check whether the cutting effect of the material is qualified, and the cutting effect:

(1) There is no burr on the edge;

(2) The blade of the eagle beak must be in line with the main blade.

The laser dies cutting machine can greatly improve the production efficiency of the factory, so it has received a warm welcome in the market. Shenzhen Test Laser Equipment Co., Ltd. has been committed to providing customers with reliable products and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.