How can we use the steel rule die making equipment?

Steel ruler mold manufacturing equipment helps to realize industrialization and commercial production, reflects the progress of manufacturing production technology and is the technological basis of manufacturing modernization. Steel ruler mold manufacturing equipment has been widely used in manufacturing technology, involving disciplines such as mechanical engineering, information and electronic engineering, metallurgy and material engineering, and engineering management.

 

What are the preparation steps for using steel ruler mold manufacturing equipment?

What are the procedural steps for using steel ruler mold manufacturing equipment?

What are the finishing steps for using steel ruler mold manufacturing equipment?

 

 

What are the preparation steps for using steel ruler mold manufacturing equipment?

Logs (unprocessed wood)

Wood is by far the most commonly used laser processing material and is easy to engrave and cut. Light-colored woods like birch, cherry, or maple are easily vaporized by laser, so they are more suitable for engraving. Each kind of wood has its characteristics, and some are denser, such as hardwood, which requires greater steel ruler mold manufacturing equipment when engraving or cutting. We recommend that you first study the characteristics of carving before carving unfamiliar wood.

Plywood

Carving on plywood is not much different from carving on wood, but there is one thing to note, the depth of the carving should not be too deep. The edge of the cut plywood will be as black as wood. The key is to see which kind of wood the plywood is made of.

 

What are the procedural steps for using steel ruler mold manufacturing equipment?

Wood carving

Generally speaking, the steel ruler mold manufacturing equipment on the wood are usually Yin carvings, and the carving depth is generally deeper. The power is generally set higher, if it encounters harder wood, the color of the engraved graphics may become darker. If you want to make the color lighter, you can increase the engraving speed and try engraving several times. Some wood will produce some oily smoke attached to the surface of the wood when carving. If the wood has been painted with a damp cloth, it can be carefully wiped off. If it is not painted, it may not be wiped clean, causing the surface of the finished product to be stained.

Woodcutting

The steel ruler mold manufacturing equipment generally does not cut wood deeply. The maximum cutting depth depends on the wood material and the power of the laser. If you want to cut very thick wood, you can slow down the cutting speed, but it may cause the wood to burn. In the specific operation, you can try to use large-size lenses, and use the method of repeated cutting.

 

What are the finishing steps for using steel ruler mold manufacturing equipment?

Coloring

After wood carving, there will generally be a feeling of being burnt. Steel ruler mold manufacturing equipment has a primitive artistic beauty that matches the wood background color. The depth of its color mainly depends on the laser power and the carving speed. But some woods are usually softer, and you can't change their color anyway (such as birch). For the coloring of the finished product, acrylic pigments can be used.

 

Taking wood processing as an example, we know the process of using steel ruler mold manufacturing equipment. Do you also want to order a steel ruler mold manufacturing equipment? Shenzhen Test Laser Equipment Co., Ltd. is a good choice for you. Since it has been focused on the product laser die machine and automatic machete machine for several years, so you can trust them.