TSD-LC1000-1325-1000Watt Die Board Laser Cutting Machine

TSD-LC1000-1325-1000Watt Die Board Laser Cutting Machine

Technical Parameters:

Model No.	TSD-LC-1000-1325
Laser output power	1000watts axial flow CO2 laser source
X-axis travel-length	1300mm
Y-axis travel-length	2500mm
Cutting precision	±0.05mm
Re-Positioning Precision	≤0.02mm
Cutting width	0.45mm, 0.71mm, 1.05/1.07mm at one line (die board)
Average. cutting speed	60meters/hour for 18mm plywood
Transmission system	Ball screw & linear guide
Driving system	3 axial servo
Optical system	Semi-optical
Moving structure	Gantry
Chiller system	Special chiller system for laser generator system
Machine table whole sizes.	3700*2300*1350mm
Laser generator size	L1900 * W550 * H1700mm
G. Weight	3500kgs
Voltage (Working table)	Single Phase 220V 50Hz
Voltage (Laser generator)	3 Phases 380V/50Hz/30A
Pressure of accessory air source	0.8Mpa
Laser generator gas matched	He, N2,CO2(99.999%)

 

Machine Features:

1. Adopt Gantry style and mixed laser path structure, machine table bed hard and stable in working, small floor space required for machine, laser optical path short, adopt imported reflect mirror and lens from America to make laser path thinner and the cut stronger.

2. Intelligent Electronic Laser cutting head coming with automatic touching system, automatically adjustment to adapt the jagged materials and keep cutting precision.

3. Adopt Panasonic Servo Drive and Motor system, Taiwan HIWIN precision linear guide rail to keep high precision cutting.

4. Highly effective smoke-exhausting system coming with optimized dust collector device to create healthy

environment for operator.

5. Automatic gas control system to ensure low energy consumption operation power consumption and gas consumption.

6. Software is easy to operate, simple and easy to understand

7. Be equipped with the optical path gas compensation function that can avoid difference and divergence of the beam and during the conduction process by gas disturbance, and can always maintain the positive pressure of clean gas in the optical cavity to prevent external smoke and enter in.

8. Be equipped with the full compensation device in optical path of autonomous developed, to ensure the consistency of the beam diameter and the constancy of the focus in the entire range of processing.